Our Renovation and Extension Services
Most of the renovation design and house extension work we do falls into one of these areas. Each one comes with its own planning and design questions, so we treat them a little differently.

More bedrooms
Second Storey & First Floor Additions
Add bedrooms, a parents' retreat or a second living area with a first floor or second storey addition, without giving up your backyard. We check your existing structure and design the new level to sit naturally on the house below.

Larger living
Ground Floor Extensions
Extend out the back or side for a bigger kitchen, open plan living or a main bedroom on the ground level. The new rooms are planned to flow on from the existing house, not sit apart from it.

Indoor outdoor living
Alfresco Designs
Covered outdoor living that connects properly to your kitchen and living areas, with a roof design that suits the house and the way you entertain.
Why Choose KBG for Your Renovation or Extension
Good renovation design starts with what's there. We look closely at your existing structure, roof lines and services before we draw, so the join between old and new is planned, not left to chance on site. Whether you're going up with a second storey addition, out with a ground floor extension, or after a better layout inside the walls you already have, you'll get an honest answer on extend vs rebuild. If an extension won't give you what you need for the money, we'll tell you and talk you through a knock down rebuild instead. Our related engineering practice, KB Consulting, can assess your existing home when a second storey or large new opening needs it. And because we work regularly with councils from the Hills and Hornsby through to Sutherland Shire and Georges River, we know what each one expects to see in an extension.
Why Choose KBG
- 100% current council approval record
- 50+ years of combined design experience, since 1983
- 5.0-star rating on Google
- Independent design studio, no in-house building arm
- Two local studios: Castle Hill and Oatley
- Every extension drawn to your block's planning controls from day one
What's Included in Your Renovation Design
Home renovation design is a different job to designing on a vacant block. We're working with an existing structure and the constraints that come with it, such as where the living areas sit, the home's solar orientation and how the living spaces relate to the outdoors. There are neighbours on either side and, quite often, a family still living in the house. Whether you're going up with a first floor addition, out with a rear or side extension, adding an alfresco, or opening up the rooms you already have, here's what we take care of:
Existing Home Measure
A site measure and drawings of your existing home, so the design is based on what's actually built, not old plans.
Planning Pathway Review
A planning review to confirm whether your house extension can go through the faster Complying Development pathway or needs a full Development Application.
Concept Design & 3D Visualisation
Concept design and 3D visualisation, showing how the new work sits with the existing house, inside and out.
Internal Reconfigurations
Internal reconfigurations and open plan conversions, including where walls can come out and what that means structurally.
Full DA or CDC Documentation
Full DA or CDC documentation, prepared and lodged with council or your certifier.
CC & Construction Documentation
CC documentation for construction approval, plus construction drawings ready for your chosen builder to quote and build from.
Engineering Coordination
Coordination with KB Consulting for structural or civil engineering, where your renovation needs it.
Renovating Locally
We design home extensions and renovations across Castle Hill, Baulkham Hills, Kellyville, Cherrybrook, Beecroft and the wider Hills District, as well as Parramatta, Epping and Hornsby, from our Castle Hill studio. From our Oatley studio, we work across Oatley, Sutherland, Cronulla, Miranda, Engadine, Bayside and the Georges River area.
Extending an older home in an established street usually means working around something, whether that's a heritage conservation area, tight side setbacks or a neighbour's living room window. Because we deal regularly with Hills Shire, Parramatta, Hornsby and Ku-ring-gai councils in the north west, and Sutherland Shire, Bayside and Georges River, Kogarah councils in the south, we know how each of them looks at overshadowing, privacy and bulk, and we design with that in mind from the first sketch. Visit us at either studio, or we'll come and walk through your home with you.
FAQs
What's the difference between a renovation and an extension?+
A renovation works within your existing footprint, such as a new kitchen layout, removing walls or reworking bedrooms and bathrooms. An extension adds floor area, either a ground floor extension out the back or side, or up with a second storey. Plenty of projects are a mix of both, and we design them as one plan so the old and new parts of the house work together. It's worth knowing that renovations can be expensive, and changes to an existing home are often hard to cost accurately until the work is underway.
Do I need council approval for a home extension in NSW?+
In most cases, yes. A home extension usually needs either a Development Application (DA) through council or a Complying Development Certificate (CDC) through a certifier. If your home and block meet the relevant criteria for things like height, setbacks and site coverage, the CDC route is generally faster. If not, or if the property is in a heritage area or affected by flooding or bushfire, it will need a DA. A 10.7 planning certificate from council (formerly a section 149 certificate), covering sections 2 and 5, shows the planning controls that apply to your property and which pathway is available. We confirm the right pathway for your extension at the start of the project, before any detailed design begins.
How much does a house extension cost in Sydney?+
It depends on the size of the extension, whether you're building out or up, the condition of your existing home and the finishes you choose. Because KBG designs your extension rather than builds it, construction costs come from your builder. What we can do is give you a clear picture of our own design fees once we understand your project, and flag anything on your site that's likely to affect the build cost, so your budget is realistic from the start.
Can I add a second storey to my house?+
Often, yes, but it depends on two things: what council allows on your block, and whether your existing house can carry the extra load. Height limits, floor space ratio and overshadowing of neighbours all come into it on the planning side. On the structural side, a structural engineer needs to check the existing footings and walls. We look at both before you commit to a first floor addition, so there are no surprises halfway through design.
Should I add a second storey or build a ground floor extension?+
It usually comes down to your block and how you want to live. A ground floor extension keeps everything on one level and is generally simpler to build, but it uses up backyard, and council limits on site coverage and landscaped area can cap how far you can go. A second storey addition keeps your garden intact and can take advantage of better views and light, but it needs the existing structure checked and more planning work around height and overshadowing. We'll look at both options for your home and tell you which one gets you the most out of your block.
Will my extension look like it belongs with the rest of the house?+
That's the aim with every renovation design we do. We look at your existing roof pitch, ceiling heights, window proportions and materials, then decide with you whether the extension should blend in quietly or be a deliberate contrast. Either can work well. What we avoid is an addition that looks like an afterthought, from the street or from the inside.
Should I extend or knock down and rebuild?+
If your home is structurally sound and most of the layout works, an extension usually makes more sense. You keep what's good and add what's missing. If you'd need to change most of the house to get the result you want, or the existing structure has real problems, a knock down rebuild can end up the better investment. We'll give you an honest view on both after seeing your home.
How long does it take to design and approve a house extension?+
Design time depends on the scope of your extension and how many changes you'd like to make along the way. On the approval side, a CDC can be issued by a certifier in as little as 20 days once a complete application is lodged. A DA goes through council and takes longer. Across the councils we work with most, it currently averages around three to five months, though a straightforward extension can move faster. A complete, well-prepared application is the best way to avoid delays, and we'll give you a realistic timeframe for your project during your first consultation.
What do you check before you start designing my extension?+
Every project starts with the same planning checks. We look at your property's zoning and what's permitted under your council's Local Environmental Plan, whether the NSW Low and Mid Rise Housing changes apply, the Complying Development rules, and your council's Development Control Plan. Sometimes that review turns up more than you expected. Some properties fall within a Low and Mid Rise Housing area that allows more on the block, which can open up another option, such as a dual occupancy, worth weighing up before you commit to an extension.